Domestic "US" Power Cords
International Power Cords
Speaker Cables

 

Our Newest GEN II Platinum Series™:
The GEN II "SE"™ (Special Edition) Cables

All of the standard GEN II product line raw materials, cable performance and attributes are present and enhanced in the “SE” cables. They represent upgrades to all of the GEN II cables that attain an even higher level of performance at a modest increase in pricing. 

All of the “SE” products feature the same high quality very finely stranded individual copper conductor constructions and PVC insulating materials, plus two major upgrades resulting in enhanced overall performance. First, all GEN II “SE” cables will have a special proprietary 98% non-metallic braided shield over the PVC cable jacket for greatly improved protection against all types of “RF” and "EM" interference. The addition of the braided non-metallic shield does not materially increase the cost of these cables compared to the higher cost of a second all copper braided or spiral shield. Very little extra weight is added to the total cable weight and without sacrificing cable flexibility! Second, each cable also has enhanced strand counts in the individual conductors resulting in a larger surface area for current to travel through the power cable conductors and for signals and frequencies to travel over the surface of the speaker, interconnect and microphone cable conductors. The “SE” cables are being sold at a higher cost to reflect the additional costs for the enhanced copper content and the non-metallic “RFI/EMI” braid shield. As with all of our GEN II cables, the “SE” cables have our “Static Guard” Platinum Silver tightly woven, finely stranded braided Nylon outer cover for a rich, vibrant look and maximum flexibility. All cables have shrink tubing at both ends with our name and directional arrows to insure proper installation and maximum performance.
 
Domestic "SE" Power Cords
The GEN II Platinum Series “SE”™ (Special Edition) power cords feature enhanced constructions of our Delta 4-12 high out-put power cable (rated for 30 Amps) and our Digimax™ 3-18 Low Out-put “Digital” power cable (rated for 10 Amps). Each has the special “RFI/EMI” non-metallic 98% braid shield for added protection against outside interference. The high out-put power cable is UL™ approved and can also be used for in-wall applications in a 110-120 volt AC dedicated electrical service from a circuit breaker panel box to the individual wall outlets in a sound room. Both types are also UL™ approved for power supply cords. When used for power cords, they are made with hand assembled Furutech high performance male and female plugs with 24 Kt. Gold plated contacts for maximum conductivity. Power cords with Furutech plugs are available with 120V male plugs designed and rated for 15 Amp or 20 Amp service and with 120V female IEC 320-C13 (15 Amp) or IEC 320-C19 (20 Amp) female plugs, depending upon the application and individual component requirements. All “SE” domestic power supply cords with Furutech plugs are made and supplied with our Platinum Silver “Static Guard” woven Nylon outer covering.

 

                15 Amp Male                15 Amp Female                20 Amp Male                20 Amp Female

International "SE" Power Cords
The GEN II Platinum Series “SE”™ (Special Edition) international power cables also feature our Delta 4-12 High Out-put power cable rated for 30 Amps and our Digimax 3-18 Low Out-put “Digital” power cable rated for 10 Amps. Each has the special “RFI/EMI” non-metallic braid shield for added protection against outside interference. The high out-put cable is a UL™ approved power supply cable suitable for "in wall" use and for dedicated circuits from circuit breaker panel boxes to wall outlets in dedicated sound rooms. Both the high out-put and low out-put digital power cables are UL™ approved for use as international power cords in countries with 220-250V AC electrical service. They are available with three standard international styles of Furutech hand assembled male plugs, each type with 24 Kt. Gold plated contacts for maximum conductivity. One or more of  these plug styles is used in over 113 countries worldwide (see the drop down section at the top of this page headed "Power Plugs"). The first is for use in the European Union (EU Schuko type 250V-16 Amp plug); the second is for the United Kingdom (UK type 250V-13 Amp fused plug) and the third is for Australia (AU type 250V-10 Amp plug). The Furutech IEC 320-C13 (250V-10 Amps) and IEC 320-C19 (250V-16 Amps) female plugs can be used with any of the three international male plugs styles we supply. All international power cords have our Platinum Silver “Static Guard” woven Nylon outer covering.

 

     "EU" Schuko 16 Amp Male with       "UK" 13 Amp Fused Male with             "AU" 10 Amp Male with                 IEC 10 and 16 Amp Females          IEC 10 and 16 Amp Females           IEC 10 and 16 Amp Females

Speaker Cables
Our GEN II Platinum Series "SE”™ (Special Edition) Gamma 4-12 standard speaker cables feature the same high quality raw materials used in the GEN II Platinum Series™ speaker cables. Each has the special “RFI/EMI” non-metallic 98% braid shield for added protection against outside interference as well as enhanced conductor designs using 6-9's (99.9999%) pure finely stranded Oxygen Free High Conductivity Electrolytic Bare Copper. They are UL™ approved for “in wall” and “in ceiling” use. They are terminated with 24 Kt. Gold plated crimp style heavy duty 8mm spade terminals, banana plugs or a combination of both, depending upon individual system requirements. The GEN II “SE” speaker cables with our exclusive high strand count conductor constructions promote extremely fast, accurate signal and frequency flow over the enlarged surface areas of the conductors providing an enhanced, more cohesive, transparent and open listening experience from the highest to the lowest frequencies. You experience a distortion free sound stage that mimics live performances and playback of pre-recorded music unlike any listening experience you may previously have experienced. Our “Static Guard” Platinum Silver tightly woven and finely stranded braided Nylon outer jacket provides a clean and professional finished look to these cables in addition to added flexibility.

 

Bi-Wire Speaker Cables
Our GEN II Platinum Series “SE”™ (Special Edition) Gamma 4-12 Bi-wire speaker cables feature the same high quality raw materials used in the GEN II Platinum Series™ Bi-wire speaker cables. Each has the special “RFI/EMI” non-metallic 98% braid shield for added protection against outside interferenceas well as enhanced conductor designs using 6-9's (99.9999%) pure finely stranded Oxygen Free High Conductivity Electrolytic Bare Copper. They are UL™ approved for “in wall” and “in ceiling” use. They are terminated with 24 Kt. Gold plated crimp style heavy duty 8mm spade terminals, banana plugs or a combination of both, depending upon individual system requirements. Labels are attached to the two “high” and two “low” Bi-wire speaker leads for easy identification and installation on your Bi-wire speakers. The GEN II “SE” Bi-wire speaker cables promote fast, accurate signal and frequency flow over the enlarged surface areas of the conductors providing an enhanced, more cohesive, transparent and open listening experience from the highest to the lowest frequencies. You experience a distortion free sound stage that mimics live performances and playback of pre-recorded music unlike any listening experience you may previously have experienced. Our “Static Guard” Platinum Silver tightly woven and finely stranded braided Nylon outer jacket provides a clean and professional finished look to these cables in addition to added flexibility.


Interconnect Cables

Our GEN II Platinum Series “SE”™ (Special Edition) Beta 2-22 Interconnect cables feature the same high quality raw materials used in the standard GEN II Platinum Series™ interconnect cables. In addition, all three types have our special proprietary “RFI/EMI” non-metallic 98% braided shield for added protection against outside interference. Both cable types are UL™ approved for “in wall” use. They have 6-9's (99.9999%) pure finely stranded Oxygen Free High Conductivity Electrolytic Bare Copper insulated with the latest formulations of 100% RoHS lead free soft and super flexible thin wall PVC insulating compounds. This provides a very cohesive, transparent and open sound stage from the highest to the lowest frequencies, with incredible distortion free sound! They are available in three styles: unshielded and single ended with 24 Kt. gold plated RCA plugs, shielded and single ended with 24 Kt. gold plated RCA plugs and shielded and balanced with Neutrik XLR connectors with 24 Kt. Gold contacts using 4% silver solder. Both of the shielded types have a 98% spiral shield with the same copper content as the conductors.

The "SE" versions of the GEN II single ended shielded and unshielded interconnect cables are now terminated with a new 24 Kt. gold plated RCA plug. This plug accomodates the larger diameter of the "SE" cables with their proprietary RFI/EMI non-metallic 98% braid shield addition which would not fit into the Coca-Bola wood housings of our patented "Low Mass" RCA plugs that are used with all of our other single ended interconnect cables. Pictures of the new RCA plugs now in use with the GEN II "SE" cables are shown below and in the drop downs for each cable type.

 

Our “Static Guard” Platinum Silver tightly woven and finely stranded braided Nylon outer jacket provides a clean and professional finished look to these cables in addition to added flexibility.

 

interconnect cables

Microphone Cables
Our GEN II Platinum Series™ “SE” (Special Edition) Beta 2-22S Professional Microphone Cables feature the same high quality raw materials used in the standard GEN II Platinum Series™ microphone cables. They have 6-9's (99.9999%) pure very finely stranded Oxygen Free High Conductivity Electrolytic Bare Copper conductors insulated with the latest formulations of 100% RoHS lead free soft and super flexible thin wall PVC insulating compounds. This provides a very cohesive, transparent and open sound stage from the highest to the lowest frequencies, with incredible distortion free sound for live and studio recording performances in lengths up to 100 feet! They have a 98% spiral shield with the same copper content as the individual conductors. They also have our special proprietary non-metallic 98% braided shield for added “RFI/EMI” protection. The professional microphone cables are shielded and balanced with Neutrik XLR connectors with 24 Kt. Gold contacts using 4% silver solder for maximum conductivity. Our “Static Guard” Platinum Silver tightly woven and finely stranded braided Nylon outer jacket provides a clean and professional finished look to these cables in addition to added flexibility. These cables are highly recommended for use as high performance professional microphone cables for live and recorded outdoor and indoor performances and studio recordings.